| Name
|
Our
product
|
Other
factories |
| Glass
|
| We adopt 5-6mm thick tempered glass, much more safe
and durable |
|
Adopt 4-5mm thick tempered or ordinary glass.
|
|
| Material
|
| Adopt 5 ply composite board,good tenacity, to cause
to curve near 60°, the condition in solidity and durable
. |
|
Adopt 3 ply thick Acryl, its very easy snap apart and only
can cause to curve be 50°, cannot use in durable.
|
|
| Tap
Valve
Core
|
| We adopt import ceramic valve core, capability at high
or low temperture and the life reaches 100 thousand times
Adopt 1.2Pmassage ump, heat-radiate well. the power of
massage is strong. |
|
Adopt mechanisation valve cor , the life of valve core is
shorter than others Only adopt massage pump with 1 P, the power
of massage is weak, loud noise, the temperture will go up if
working long time .
|
|
| Pump
|
| Adopt 1.2Pmassage pump, heat-radiate well. the power
of massage is strong . |
|
Only adopt massage pump with 1P, the power of massage is weak,loud
noise, the temperture will go up if working long time. |
|
| Water-
proof
Ability
|
| Adopt original creation water-proof technology, (made
with aluminum alloy high-low basin design)effective prevent
the water spout out . |
|
Use glass glue or common mucus strip to prevent water,the
acidity of glass glue will canker electric plating part .after
this,the water will be seepage.
|
|
| Sliding
Door Design
|
| The door of steam house is sliding door , it is designed
with water-proof design ,no seepage. |
|
The door of steam house is folding ones, and occupies the
space, the connect with door part could be seepage and distorting.
|
|
| Appearance
|
| Our product is full utilizing the space, compared with
other factory, the space inside the steam house is large
than other factories product. |
|
The same specification,but small space inside steam house,
the space of massage bathtub also very narrow and limited, appearance
design only suit chinese.
|
|
| Electrical
|
| Made with double CPU and insurance ,the quality more
reliable . |
|
Others factories only use single CPU just to reduce the cost,
it is unreliabl , also increase the cost after sale.
|
|
| Function Of The Products
|
| Our products is multifunctional, it is simple to control,
more practical and reliabe. |
|
Other factory product are npracticability, many problem exists
in telephone TV.ect., because of the water. also, will disturb
by the electric wave and increasing the cost of service.
|
|
| Installation
And Maintain
|
| We are adopting patent technology ,collecting all the
functional devices to be installed inside the lumium alloy
column, which makes installation and aintenance much more
convenient, no necessary to move the room body. |
|
Most of the electrical and water devices are installed on
the back of the body, quite difficult to maintain and repair.
|
|
| Packing
|
| As concerned packing, our product is separated into
two parts or more, easy to carry, save transportation
space and freight. |
|
One piece packing, large volume, very difficult to carry and
high freight .
|
